Neopost IN-600 Series User Manual Download Page 134

Page: 134 / 248

Funds Data

6.5

Funds Summary Report

This report displays the information on funds usage since the installation of the system.
The content is limited to the history available in the PSD.

Requirements

This report is available as user or supervisor.

Output

• On label
• Screen
• USB printer

Content

Comments

Fields

Printed report only.

Current date and time

Printed report only.

PSD status

Printed report only.

Die number

Total postage printed by the system.

Funds used (ascending)

Postage available in the system to print.

Funds available (descending)

Total funds downloaded into the system.

Must be equal to asc descending.

Control total

Total number of normal items.

Non zero items

Total number of zero items.

Zero Items

Total number of zero + non-zero items.

Total items

127

| Page 127 | | Nov-12-2015 10:25 |

Reports

Summary of Contents for IN-600 Series

























































































































































































































































Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands

Neopost IN-600 Series, User Manual

Search results

Summary of Contents for IN-600 Series

Reviews:

Brands by name

Popular brands