42
5.6
High Capacity Vertical Stacker (HCVS-1)
The High Capacity Vertical Stacker can be used to
stack filled envelopes. The vertical stacker can store
up to 325 filled envelopes. The vertical stacker can
be equipped with Mail Piece Production Control
(MPPC).
5.6.1
Adjusting the Side Guides
Adjust the side guides with wheel A so, that a
margin of 3 to 5 mm is left between the envelopes
and the side guides.
For small envelopes it can be necessary to remove
the extensions B from the envelope support.
5.7
Side exit
The system can be equipped with a side exit and
catch tray. The side exit can be fitted instead of the
standard envelope receiving tray. The side exit
allows a conveyor or a franking system to be fitted in
line with the system.
The side exit can also be used with a catch tray to
achieve vertical stacking. The catch tray is delivered
with the side exit.
5.8
Mail Piece Production Control
(MPPC) (Option
1
)
The folding and inserting system can be equipped with Mail Piece Production Control. This
option enables the system to verify the inserted documents or sets of documents with a
database, which is generated when you print the documents. The system gives a warning
when a mail piece is missing at the exit of the inserter.
Refer to the appendix “Mail Piece Production Control” for an extensive description of this
option.
5.9
Insert’n Frank™ (insert’n Mail)
If this system is connected to a mailing/franking system, insert’n Frank™ allows you to:
•
Switch automatic mailing/franking on or off
•
Remotely select a mailing/franking job
•
Set the printing/franking value (option)
•
Automatically set the printing/franking value using the inserter data
For programming this option refer to 4.2.7 ”Mailing/Franking Settings (Option)” on page
27.
1. Ask your supplier if this option is available in your country, and for your system.
A B
