26
Note
The maximum number of sheets in a set is 25. When the number of sheets exceeds 8 or
10, depending on the fold, the document can not be folded anymore. In this case, the
maximum length of sheets is 148 mm for a C5/6 envelope. Also make sure that the fold is
set to No fold.
Ignoring this will certainly lead to stoppages.
When the maximum number of sheets exceeds the programmed maximum number of
sheets in a set, the system stops and error INS-RE-14 will be displayed. After removing
the set and pressing the
Reset
button, the system will start and repeat the process until
an insert or divert mark is encountered, error INS-RE-15 (final set part) will be displayed.
4.2.5
Double Feed Control Settings
In the ‘DFC settings’ menu you can set Double Feed
Control (DFC) for the different feeders on or off.
To set the DFC for the different feeders:
1. Press the
button to select a feeder.
2. Press the
button to switch the DFC on or
off. When switched on, the
icon is displayed.
When a job is started, the first document taken per
feeder is used for a reference measurement. When a
document is exceeding that reference thickness an error will be displayed.
Note
When Daily mail is selected, the DFC will be switched off automatically.
4.2.6
Job Name
It is possible to store the job with a meaningful job
name, to easily recognize the job. This name is
displayed at job selection. Enter a job name with the
alpha-numeric keypad.
•
Use the
button to clear a character left of
the cursor position (backspace).
•
Use the
button to clear all entered
characters and start again.
