22
Use the
button to switch automatic envelope sealing on, off or use reading (in
case of a job with reading settings, see ”Sealing Control” on page 34).
•
Press
to select an envelope with open flap.
This means that envelopes are fed with open
flap. Use the upper
button to enter the
applicable dimensions.
The envelope height can be set between 90 mm
(3.5 inch) and 162 mm (6.38 inch).
It is also possible to select ISO standard
envelopes or dimensions in inches (depends on
the installation settings).
Use the second
button to enter the flap height.
The flap height can be set between 32 mm and the envelope height minus 32 mm
(1.26 inch).
Use the
button to switch automatic envelope sealing on or off.
•
Press
to define a job without inserting the documents in envelopes (no envelope
mode). This can be useful for jobs, where documents only have to be sorted and/or
folded.
4.2.2
Document Settings
In the ‘document settings’ menu you define the
document formats and the number of documents
that must be picked from the different feeders.
•
Press
to set the number of sheets for the
different feeders.
-
Press
to select a feeder. The selected
feeder is highlighted.
-
Press the arrows to change the number of
sheets that must be picked from the
highlighted feeder. When the number of documents is 0, the selected feeder will
be deselected.
Note
When a feeder is set to daily mail the number of documents is always 1 and can not be set
in this menu.
