11
ENGLIS
H
•
Test
: opens the ‘test menu’ (see 2.4.6 ”Test Menu” on page 11). Use this menu to
test the system.
•
Online services
: opens the ‘Online Services’ menu (option, see 5.3 ”Online Services”
on page 36). This menu enables to connect the system to a server and receive
messages.
•
Job menu
: opens the ‘job menu’. In this menu you can create, edit, copy or delete
jobs (see 2.4.7 ”Job Menu” on page 11).
•
Read config sheet
: reads Barcode Reading (BCR) settings from a BCR configuration
sheet.
2.4.6
Test Menu
Open the ‘test menu’ from the ‘supervisor menu’.
Use this menu to check the system, reset all
photocells and execute a reading test. The ‘test
menu’ shows the following functions:
•
Diagnostics
: use this function to verify that all
motors, clutches and sensors are correctly
connected. This test briefly activates the
actuators and then measures the current to
determine the status of the actuators and
clutches.
Note
Remove all paper and close all covers before testing.
•
Reset photocells
: used for photocell calibration.
•
OMR test
: use this menu to test the reading head and the quality of the codes on the
sheets. Follow the directions on screen.
•
BCR test
: use this menu to test the reading head and the quality of the codes on the
sheets. Follow the directions on screen.
2.4.7
Job Menu
When you press the
Job menu
button in the
‘supervisor menu’, the ‘job menu’ opens. This menu
enables you to create, edit, copy or delete jobs.
The ‘job menu’ shows the following functions:
•
Create job
(see 4.1 ”Create a Job” on page 20)
•
Edit job
(see 4.3 ”Edit a Job” on page 27)
•
Copy job
(see 4.4 ”Copy a Job” on page 28)
•
Delete job
(see 4.5 ”Delete a Job” on page 28)
