Nederman RBU 1300, User Manual

Page: 24 / 255

RBU
EN
10 Appendix A: Installation protocol
• Copy the installation protocol, fill it in and save it as a service record.
• For values, note the value in the result column, otherwise, a tick will suffice if the item has been performed or
considered.
NOTE!
If a value is outside the limit or a result is incorrect or missing, this must be rectified before the initial
start-up and normal operation.
Unit number Date Performed by
Description Reference Result Notes
Delivery checks
Missing components Chapter 4 Before installation
Transport damage Chapter 4 Before installation
Before installation
Foundation Section 4.2 Foundation
Total weight Section 3.6 Technical data
Access for maintenance Section 4.1 Location
Mounting (check availability)
Optional: Maintenance switch Section 3.2 Connections
Installation room and ventila-
tion openings (indoor install-
ation) Section 5.1 Indoor installation
Foundation and outdoor
placement (outdoor installa-
tion) Section 4.2 Foundation , Sec-
tion 5.2 Outdoor installation
Dust collector See dust collector manual
Duct system Section 3.2 Connections
Optional: Pilot signal cable Section 3.2 Connections
Start- and control unit See the start- and control
unit manual
Exhaust air duct directed
away from the unit Chapter 5 Installation
Compressed air
Air lines cleaned Section 5.3 Compressed air
installation
24