June 2004
NEC Business Solutions Ltd
84 - Chapter 6
Setting Up TeLANophy
Doc. No. 8
557 - Re
lease 1.1
June 2004
S
ECTION
14
U
SING
T
E
LAN
OPHY
APPLICATIONS
WITH
WAN
S
AND
THE
I
NTERNET
TeLANophy clients or workstations can use TCP/IP to run TeLANophy
applications over the Internet or a wide area network (WAN). The following
conditions are required to establish a TCP/IP connection between a remote
workstation and the voice messaging system:
•
The workstation is connected to the voice messaging system through a WAN,
dial-up Internet service, or dedicated Internet connection.
•
The network administrator has configured the network to allow for remote con-
nections.
•
TeLANophy uses TCP port 1024. You need to know the TCP/UDP port to allow
access through a firewall.
After these requirements are met, the workstation can access the voice
messaging system as it would any other Internet service.
To set up a workstation for a WAN or Internet connection
1 From the workstation, connect to the WAN or Internet service provider,
using TCP/IP as the network protocol.
2 After the connection between the workstation and host is established,
open the desired TeLANophy application.
