NEC XEN IPK DIGITAL TELEPHONE Installation Manual Download Page 25

Page: 25 / 104

Xen IPK Xen Mail CTI Installation Guide

Setting Up the System

Chapter 2 - 19

oc. N

o. 8557 -

Release

1.1

June 20

8 Type

to proceed with the voice messaging system Setup utility.

9 From the Setup Type menu, type

to choose “Configure system” and

press ENTER.

10 Press ENTER to confirm that the voice messaging software is installed

on drive E.

11 Press ENTER to confirm that the voice messaging software is installed

in the Vmail directory.

12 Review the features and options available with your new system that are

listed on-screen. Press ENTER to continue.

13 From the Update Configuration menu, choose all the configuration

options you want to set up your system:

• To set up TeLANophy, type

and press ENTER.

• To enable network backups, type

and press ENTER.

• To select the system language, type

and press ENTER.

NOTE:

Numbers for each menu item may vary.

14 When you have completed your selection(s), press ENTER.

To set up the voice messaging system software, continued

1 From the Select Network Protocols menu, select all that apply:

• To select IPX/SPX, type

and press ENTER.

• To select TCP/IP, type

and press ENTER.

• To select NetBIOS over TCP/IP, type

and press ENTER.

NOTES:

• Either a TCP/IP or IPX/SPX configuration is required for TeLANophy.
• Either an IPX/SPX or a NetBIOS over TCP/IP configuration is required to

perform network backups.

• To set up NetBIOS over TCP/IP, a TCP/IP configuration is also required.

Select option 2 and 3 to set this up.

2 When you have completed your selection(s), press ENTER.

3 If you selected TCP/IP, perform the following actions. Otherwise, go to

step 5.

• Type

and press ENTER. Type the correct value for the “TCP/IP Address”

field and press ENTER.

• Type

and press ENTER. Type the correct value for the “Subnet Mask” field

and press ENTER.

• Type

and press ENTER. Type the correct value for the “Default Router”

field and press ENTER.

• Type

and press ENTER. Type the correct value for the “Domain” field and

press ENTER.

• Type

and press ENTER. Type the correct value for the “Name Server” field

and press ENTER.

4 Confirm your entries are correct. Press ENTER to continue.

Summary of Contents for XEN IPK DIGITAL TELEPHONE









































































































Search results

Summary of Contents for XEN IPK DIGITAL TELEPHONE

Reviews:

Related manuals for XEN IPK DIGITAL TELEPHONE

Brands by name

Popular brands

NEC XEN IPK DIGITAL TELEPHONE, Installation Manual

Search results

Summary of Contents for XEN IPK DIGITAL TELEPHONE

Reviews:

Related manuals for XEN IPK DIGITAL TELEPHONE

Brands by name

Popular brands