NEC XEN IPK DIGITAL TELEPHONE Installation Manual Download Page 13

Page: 13 / 104

Xen IPK Xen Mail CTI Installation Guide

Setting Up the System

Chapter 2 - 7

oc. N

o. 8557 -

Release

1.1

June 20

ECTION

NSTALLING

THE

VOICE

MESSAGING

SYSTEM

BOARDS

The voice messaging system board provides all voice messaging system
application functions and voice recording storage on their hard disks.

To install the voice messaging system board in the phone system, perform
the following procedure. For an illustration of the main board used for all
systems, see “About the system board.”

To install the voice messaging system board(s)

1 Turn off the phone system.

2 Insert the board halfway into any available slot in the phone system.

3 Do one of the following:

• To access the voice messaging system screens using a monitor, keyboard,

and mouse, plug these devices into the appropriate locations on the voice
messaging system board.

• To access the voice messaging system screens using a remote access con-

nection, set SW3 dip switch #2 Off for a direct connection or On for a modem
connection.

4 Confirm the SW3 dip switch #1 and #2 are set Off and switch #3 and #4

are set On.

5 Insert the board all the way into the slot.

6 Confirm the Shutdown switch is set On.

7 Turn on the phone system. When the software LED lights, the voice

messaging system is running and ready for use. The system may take
5-10 minutes to start.

Summary of Contents for XEN IPK DIGITAL TELEPHONE









































































































Search results

Summary of Contents for XEN IPK DIGITAL TELEPHONE

Reviews:

Related manuals for XEN IPK DIGITAL TELEPHONE

Brands by name

Popular brands

NEC XEN IPK DIGITAL TELEPHONE, Installation Manual

Search results

Summary of Contents for XEN IPK DIGITAL TELEPHONE

Reviews:

Related manuals for XEN IPK DIGITAL TELEPHONE

Brands by name

Popular brands