June 2004
NEC Business Solutions Ltd
60 - Chapter 4
Backing Up & Restoring the System
Doc. No. 8
557 - Re
lease 1.1
June 2004
To restore system default settings (disaster recovery)
1 Shut down the voice messaging system application.
2 Open an OS/2 command prompt from the voice messaging system by
performing one of the following:
• If you are using a monitor, keyboard, and mouse plugged into the voice mes-
saging system board to access the voice messaging system screens, go to
the OS/2 desktop and select the OS/2 Window icon.
• If you are using a remote access connection to access the voice messaging
system screens, switch to the
OS/2 Host Process Switcher window. Type
0
to choose “Start a new 0S/2 text
session” and press ENTER.
3 At the OS/2 command prompt, type
f:
and press ENTER.
4 Type
cd \
and press ENTER.
5 Type
default
and press ENTER.
6 Shut down and restart the voice messaging system by setting the
board’s Shutdown switch Off. After the system has shut down, set the
switch On and then press the Power button to restart.
7 Set up or change settings for the voice messaging system software as
described in “Setting up the voice messaging system software”.At the
OS/2 command prompt, type
f:
and press ENTER.
8 Type
cd \
and press ENTER.
9 Type
default
and press ENTER.
10 Shut down and restart the voice messaging system by setting the
board’s Shutdown switch Off. After the system has shut down, set the
switch On and then press the Power button to restart.
11 Set up or change settings for the voice messaging system software as
described in “Setting up the voice messaging system software”.
