NEC XEN IPK DIGITAL TELEPHONE Installation Manual Download Page 51

Page: 51 / 104

Xen IPK Xen Mail CTI Installation Guide

Backing Up & Restoring the System

Chapter 4 - 45

oc. N

o. 8557 -

Release

1.1

June 20

15 If you selected “Version 4.x directory service,” perform the following

actions:

• Type

and press ENTER. Type the correct value for the “NetWare name

context” field and press ENTER.

• Confirm your entry is correct. Press ENTER to continue.

• Type

and press ENTER. Type the correct value for the “Preferred Net-

Ware server name” field and press ENTER.

• Confirm your entry is correct. Press ENTER to continue.

16 From the Ethernet Frame Header menu, perform the appropriate action

below:

• To select “Ethernet 802.2,” type

and press ENTER.

• To select “Ethernet 802.3,” type

and press ENTER.

• To select “Ethernet Snap,” type

and press ENTER.

• To select “Ethernet II,” type

and press ENTER.

To install network protocols for backups, continued

1 When you have completed your selection, press ENTER to continue.

2 If you selected NetBIOS over TCP/IP, perform the following actions.

Otherwise, go to step 4.

• Type

and press ENTER. In the “Workstation name” field, type the NT log

on name of the voice messaging system and press ENTER.

• Type

and press ENTER. In the “NT Domain name” field, type the voice

messaging system’s NT domain name and press ENTER.
If no domain, type the Windows workgroup name in this field.

• Type

and press ENTER. In the “Workstation description” field, type a

description of the voice messaging system and press ENTER.

• Leave the “User” and “Password” fields blank.

3 Press ENTER to confirm your entries.

NOTE:

If you have not configured TCP/IP, an error message is dis-
played. Follow the on-screen instructions to continue.

4 Follow the on-screen instructions to continue.

5 When you reach the Setup Complete menu, press ENTER to exit the

Setup utility.

6 Shut down and restart the voice messaging system by setting the

board’s Shutdown switch Off. After the system has shut down, set the
switch On and then press the Power button to restart.

NOTE:

A system with incorrect protocol information cannot connect to
the LAN. To reenter the correct values, perform the procedure,
”To change an existing network protocol configuration.”

Summary of Contents for XEN IPK DIGITAL TELEPHONE









































































































Search results

Summary of Contents for XEN IPK DIGITAL TELEPHONE

Reviews:

Related manuals for XEN IPK DIGITAL TELEPHONE

Brands by name

Popular brands

NEC XEN IPK DIGITAL TELEPHONE, Installation Manual

Search results

Summary of Contents for XEN IPK DIGITAL TELEPHONE

Reviews:

Related manuals for XEN IPK DIGITAL TELEPHONE

Brands by name

Popular brands