Xen IPK Xen Mail CTI Installation Guide
Backing Up & Restoring the System
Chapter 4 - 47
D
oc. N
o. 8557 -
Release
1.1
June 20
04
Automatic Windows log on
After performing the procedures on page 46, you can set up your voice
messaging system to automatically log on to a Windows network by
performing the following procedure.
If you prefer to avoid the security risks of automatically logging on, you can
use the second and third procedures on page 46 to manually log on.
To automatically log on to Windows NT with NetBIOS
1 Make a backup copy of the Startit.cmd file.
2 Go to the OS/2 command prompt and type
tedit c:\startit.cmd
and press ENTER.
3 Go to the beginning of the file and insert the following command lines. If
not using a domain, insert all but the
/d:domain
command. Use specific
words in place of “userid” and “password.” “Server” is the Windows
computer name and “Share” is the Windows share name.
logon userid /p:password
/d:domain
net use h: \\server\share
4 Save the file and close it.
5 Shut down and restart the voice messaging system by setting the
board’s Shutdown switch Off. After the system has shut down, set the
switch On and then press the Power button to restart.
To change the default administrator user ID and password
1 Go to an OS/2 command prompt and type
logon admin /p:admin
and press ENTER.
2 Use specific words in place of “userid” and “password” and add a new
admin by typing
net user userid password
/add
and pressing ENTER.
3 Assign administrator privileges by typing
net user userid
/privilege:admin
and pressing ENTER.
4 Log off the default administrator by typing
logoff
and pressing ENTER.
5 Log on as the new administrator by typing
logon userid /p:password
and pressing ENTER.
