June 2004
NEC Business Solutions Ltd
26 - Chapter 3
Remote Access
Doc. No. 8
557 - Re
lease 1.1
June 2004
S
ECTION
2
S
ETTING
UP
THE
SUPPORT
COMPUTER
Before you can establish a remote access connection with the voice
messaging system, you need to install CoSession Windows remote
software version 7.0 on the support computer. Remote access software is
preinstalled in the C:\Cs2 directory on the voice messaging system.
When you install the software, the remote software setup program will
automatically detect the support computer’s modem settings. However,
some communications software may conflict with the setup. You may need
to edit the System.ini file to resolve these conflicts. If a message appears
during installation, write down the message so you can complete the
requested changes after setup is complete. For more details, see the
Readme file on the voice messaging system’s disc.
To install remote access software
1 Do one of the following:
• If you are installing remote software on a support computer that does not use
MS-DOS remote access software, go to step 2.
• If you are installing the remote software on a support computer that uses
MS-DOS remote access software to support other voice messaging sys-
tems, then follow the instructions in "Preparing an existing support computer"
on page 10 before continuing with this procedure.
2 If the support computer uses an external modem, confirm that it is turned
on.
3 Insert the voice messaging disc in the support computer’s CD-ROM
drive.
4 From the Start menu, choose “Run.”
5 Type
<disc drive>:\Cosession\setup
and choose “OK.”
6 Follow the on-screen instructions until you reach the Install Options
dialogue box.
7 Select “Custom Install” and click “OK.”
8 Clear the “Cosession for Windows Host” selection.
9 Select “CoSession for Windows Remote” and click “Install.”
