NEC SV8500, Operation And Maintenance Manual

Page: 937 / 975

– 890 –
CHAPTER 7 Maintenance Commands
Auto Scroll: Check this box to refresh the Processing Status Log.
< For Redundant Data Memory Backup on Individual Hard Drive > Note 3
Click Option in the menu bar, and select Drive Select. A window, with the following parameter, appears.
In the window, designate the affected Drive:
Office Data: Drive B (default setting)
Drive C
Drive B/C
Note 1:
When Data Memory is selected, Network Data Memory (NDM) and Local Data Memory (LDM) are
also loaded/backed up/verified simultaneously.
Note 2: By saving the Number Sharing data, the data concerning Dual Station Calling Over FCCS is also
installed/saved/verified simultaneously.
Note 3:
This data must be specified only when using the Redundant Data Memory Backup on Individual Hard
Drive function. When specifying the data here (to use the function), consider the following:
•When Drive B/C is specified in the Office Data parameter while Hard Disk to Memory or Verify HDD
against MEM is designated in the Direction Select parameter, the data is automatically adjusted as
Drive B.
Note 4:
This data is for WLAN Handset (MH Series) and SIP standard terminals.
Buttons
Start: Execute the specified file load/backup/verification.
Close: Exit the command.