NEC SV8500, Operation And Maintenance Manual

Page: 112 / 975

– 65 –
CHAPTER 2 Operations of SV8500 Server
Note: When halt command is executed, turning off the power of PC and ejecting CD-ROM from PC can be
performed automatically. Turning off the power of PC begins approximately 30 seconds later when halt
command is executed.
STEP 12 If you modified the BIOS setting (booting drive priority) at STEP 3, restore to the previous set-
ting as needed.
[End]
CF card initialization is now finished. Go on to the initial installation procedures with PCPro Tools. Refer
to the “Installation Manual”
o ”CHAPTER 5 SYSTEM STARTUP” o “1.2 Program Install to CF Card”
for the initial installation procedures.
Note: If you use a PC whose writing speed to CF card is slow, an error may occur.
• If the process ends up showing error, the CD-ROM will not be ejected automatically; remove man-
ually.
• If “CF is NOT found...” is displayed, the PC is failed to recognize the card. Try this on other PC.
root@(none):~# halt
......
Execute Shut Down.