NEC N8100- 1241F, User Manual

Page: 56 / 358

2-24 General Description
USING YOUR SERVER
This section describes basic operations of the server including how to use devices such as the DVD-
ROM drive. See Appendix B for notes on using the disc and accessories including the keyboard and
the mouse.
Front Bezel
Remove the front bezel to power on/off the server, to access the DVD-ROM drive and to
install/remove hard disk drives to the 3.5-inch disk bays.
IMPORTANT:
„
To open the front door, you must unlock the door with the provided
security key.
„
Pay attention not to press the POWER switch when you install or
remove the front bezel.
Installing or Removing the Front Bezel
When turning the power of the server on/off, accessing to the DVD-ROM drive, or installing or
removing a hard disk drive on or from the 3.5-inch disk bay, first remove the front bezel.
IMPORTANT:
The front bezel can be opened only when you unlock
it by using the attached security key.
1.
Insert the attached security key into the key slot and turn the key to the front bezel side
with it pressed lightly to release the lock.
2.
Hold the right end of the front bezel lightly to pull it toward you.
Unlock Lock