NEC N8100- 1241F, User Manual

Page: 287 / 358

Upgrading Your Server 9-47
5.
Remove the screw from the riser card, and remove the extension slot cover.
NOTE:
Keep the removed extension slot cover for future use.
6.
Install the PCI board on the riser card.
Align the PCI board terminal section with the riser card slot, and firmly push the PCI
board until it is fully seated.
IMPORTANT:
„
Do not touch the terminals of the riser cards and PCI boards with
your bare hand. Fingerprints and dust left on them cause the server
to malfunction.
„
If you are unable to install a PCI board correctly, remove it, and
then install it again. Be careful not to apply excess force to a PCI
board or riser card. Doing so may damage the card.
NOTE:
Confirm that the end of the PCI board bracket is inserted in the
frame slot of the riser card.
Low-Profile side Full-height side
Low-Profile side Full-height side