NEC N8100- 1241F, User Manual

Page: 120 / 358

4-20 Configuring Your Server
Exit
The options on the menu are described below.
IMPORTANT:
For SATA hard disk drive model, record the current
SATA controller options in the Peripheral Configuration page of the
Advance menu before reloading the Setup or custom defaults. The
SATA controller options affect the RAID configuration.
Exit Saving Changes
Exit after writing all modified BIOS SETUP item values to CMOS.
Exit Discarding Changes
Exit leaving CMOS unmodified. User is prompted if any of the setup fields ware modified.
Load Setup Defaults
Load default values for all BIOS SETUP items.
Load Custom Defaults
Load custom defaults for BIOS SETUP options.
Save Custom Defaults
Saves the current values as custom defaults. The “Load Custom Defaults” menu appears on the
screen after saving the custom default values.
Discard Changes
Read the previous values of the all BIOS SETUP items from CMOS.
Save Changes
Write all BIOS SETUP item values to CMOS.