-
59
-
4.3.5
I/O Board Error Lamp
The I/O Board Error lamp is installed on each of the front and rear faces of the Server. The lamp
goes on umber if an error occurs on the I/O Board. (The lamp is off in the normal operation status.)
When the lamp on the front face of the Server goes on umber, check the BMC Error and PCI Slot
Error lamps on the rear face of the Server. If the BMC Error lamp lights umber, replace the I/O
Board. If any of the PCI Error lamps lights umber, replace the PCI Board inserted to the slot
having the lamp being on. If the error lamp lights umber again in spite of clearing the lamp after
the replacement, replace the I/O Board.
I/O board error lamp
I/O board error lamp
BMC error lamps
PCI slot #1 error lamp
PCI slot #2 error lamp
PCI slot #3 error lamp
PCI slot #4
error lamp
PCI slot #5 error lamp
PCI slot #6
error lamp
PCI slot #9 error lamp
PCI slot #8 error lamp
PCI slot #7 error lamp
Summary of Contents for EXPRESS5800/140He
