-
118
-
6.
Connect the cable to the new battery that will be installed in the Server.
Note that the connector cannot be inserted incorrectly.
7.
Fill in the replacement date on labels (2) included in the package for maintenance devices.
Put one of the labels on the battery.
Put the other label near the nameplate of the Server (over the old onboard RAID battery
label.)
8.
Install the battery and DIMMs on the I/O Board.
Use the screws removed in step 3 for fixing the battery.
(The package for maintenance devices includes spare screws.)
9.
Install the power cage, fan cage, fans and all the covers to recover the original state.
10.
Connect the power cables to the power units, turn on the power of the Server, and start
the MegaRAID Configuration Utility.
Select [Objects]
→
[Adapter]
→
[Reset Battery Charge Counter] from the Top menu and
select [Yes] to clear the charging cycles.
NOTE:
The new battery is not charged. The battery is fully
charged by continuous operation about six hours after the
Server is started.
4.10.12 Replacement of PCI Board
Refer to the User's Manual for the replacement procedure and notes on the PCI Board.
Summary of Contents for EXPRESS5800/140He
