-
72
-
4.
Wait a few minutes for the board to cool down, and pull out the Memory Board from the
Server.
When the button switch for DIMM slot error lamp is pushed, parts of the error can be
specified.
We recommend you wait for a few minutes after the Power lamp goes off because any
Memory Board is heated excessively during power distribution.
5.
Replace the Memory Board or DIMM and install the new or modified Memory Board in
the Server.
6.
Press the Attention button on the installed Memory Board.
The Power lamp on the Memory Board blinks green and goes on after a while.
7.
Install the memory slot cover and the front bezel.
Summary of Contents for EXPRESS5800/140He
