NEC EXPRESS5800/140He, Service Manual

Page: 160 / 184

- 144 -
No. Error message Action
22 The domain name is illegal. The domain name can only accept alphanumeric
characters, "-" (minus sign) and "_" (underscore). It
should be up to 256 characters.
23 The SMTP server address is
too long. The SMTP server address should be up to 256
characters.
24 The SMTP port number is
illegal.
25 The number of retries is
illegal.
26 The retry period is illegal.
Numeric characters are only available.
27 The value of "To" is too long.
28 The value of "From" is too
long.
The value should be up to 256 characters.
29 The value of "Subject" is too
long. The value should be up to 512 characters.
30 The message is too long. A message should be up to 4062 characters.
31 The file is opened
unsuccessfully. The specified file may not exist. Check if the
specification such as the file name is correct.
32 The file is closed
unsuccessfully. The specified file may be broken.
33 The directory cannot be
opened. The specified file may not exist. Check if the
specification including the file name is correct.
34 Timeout occurred. After checking the network environment, retry the
operation. If the operation fails several times, replace
the Management LAN Card. If the error still occurs,
replace the I/O Board.
[Firmware update errors]
No. Error message Action
1 The BMC includes the
following image updated
incompletely. Restart the Server to complete the update.
2 The update area status is
acquired unsuccessfully. This may be caused by network congestion. Retry
the operation. If the operation fails several times,
replace the Management LAN Board. If the error still
occurs, the BMC may be defected. Replace the I/O
Board.
3 The update data is too large. The update file may be broken. Get the update file
again.
4 The update is prepared
unsuccessfully. This may be caused by network congestion. Retry
the operation. If the operation fails several times,
replace the Management LAN Board. If the error still
occurs, the BMC may be defected. Replace the I/O
Board.
5 The file size is illegal.
6 The revision information
cannot be found.
The update file may be broken. Get the update file
again.
7 The rollback image is created
unsuccessfully. Retry the operation. If the operation fails several
times, replace the I/O Board.