NEC Express5800/120Eg, User Manual, Page: 88 / 332

4-20 Configuring Your Server
The following describe the clearing procedure.
WARNING
Do not disassemble, repair, or alter the server.
Never attempt to disassemble, repair, or alter the server on any occasion other
than described in this manual. Failure to follow this instruction may cause an
electric shock or fire as well as malfunctions of the server.
1.
Power off the server and unplug the power cord.
2.
Remove the left side cover from the server (see Chapter 9).
3.
Change the desired jumper switch setting.
IMPORTANT:
„
Use the clip over jumper pins on the mother board.
„
Do not lose the clip.
4.
Reassemble the server and press the POWER switch.
During POST, the following code and message are displayed on the screen.
5120 CMOS cleared by jumper
or
5121 Password cleared by jumper
5.
Power off the server upon completion of POST.
6.
Restore the jumper switch setting and power on the server for reconfiguration.