NEC Express5800/120Eg, User Manual, Page: 33 / 332

General Description 2-5
1 5.25-inch device bay (4)
Backup file device may be installed in the 5.25-inch device bay.
The server can include a maximum of two devices.
2 CD-ROM drive
The CD-ROM drive reads data from the inserted CD-ROM.
2 -1 Headphone jack
2 -2 Volume control
2 -3 Access lamp (lights in amber while being accessed)
2 -4 CD-ROM slot
2 -5 Emergency hole
2 -6 Open/Close button
3 Hard disk drive bay
The hard disk drive bay contains up to four hard disk drives. Hard disk drives are installed
from the bottom to top of the hard disk drive bay.
4 3.5-inch floppy disk drive
Insert a 3.5-inch floppy disk to the 3.5-inch floppy disk drive to read data from the disk or write
data to the disk.
4 -1: Eject button
4 -2: Disk inserting section
4 -3: Floppy disk access lamp (lit green during accessing)
5 Power switch
The power switch is used to turn on/off the power. If you press the switch once, then the
POWER/SLEEP lamp goes on and the power is turned on. If you press the switch again, the
power is turned off. The system is forcibly shut down when the power switch is pressed
continuously for four seconds or longer.
6 Lamps (see the figure on the previous page)
7 Reset switch
The reset switch is used to reset the server.
8 Dump switch (NMI switch)
Non-maskable Interrupt switch.
The dump switch is used to collect the event logs having occurred in the server.