manualshive.com logo in svg

NEC Express5800/120Eg, User Manual, Page: 324 / 332

Share
Download
NEC Express5800/120Eg User Manual Download Page 324

F-14  Installing Windows 2000

USB 2.0 Driver

USB 2.0 Driver is pre-installed. When restoring the system or re-installing the system, the driver is
automatically installed in the process of updating the system.

Installing SCSI Controller Driver (N8103-65F/75)

If you utilize SCSI controller driver (N8103-65F/75), install it according to the following procedure:

 

1. 

Start [Device Manager] from [Start] menu 

→

 [Control Panel]

→

 [Administrative Tools]

→

[Computer Management].

 

2. 

Double-click the SCSI Controller driver which Device Manager lists as unknown device.

 

3. 

Click [Update Driver].

 

4. 

When the "Update Device Driver Wizard" appears, select "Install from a list or specific
location [Advanced]" and click [Next].

 

5. 

Select "Don't search. I will choose the driver to install" and click [Next].

 

6. 

Click [Have Disk..].

 

7. 

Insert "Windows 2000 OEM-DISK for EXPRESSBUILDER" into the floppy disk drive,
enter "a:\" into "copy manufacturer's file from:" and click [OK].

 

8. 

Specify the following driver and click [Next].

–

 

[INITIO INI-A10XU2W PCI SCSI Controller]
(When N8103-65F board is installed.)

–

 

[Adaptec Ultra320 SCSI Cards (Win2000]
(When N8103-75 board is installed.)

The installation of the driver is completed.

Restart the system according to the message appeared on the screen.

Installing SCSI Controller Driver (N8103-56F/95)

If you utilize SCSI controller driver (N8103-56F/95), update your system with NEC
EXPRESSBUILDER CD-ROM attached to your system.

The SCSI controller driver will be installed automatically.

Summary of Contents for Express5800/120Eg













































































































































































































































































































































Reviews:

No comments