NEC DSX Software Manual Download Page 404

Page: 404 / 984

Voice Mail

374

◆

Features

DSX Software Manual

Call Forwarding Timers and Voice Mail

The following diagram shows how the system handles an outside call transferred to an extension that is for-
warded to voice mail.

Transferred Outside Call to Forwarded Extension

Conditions

• If an extension has a

ashing Ring/Message lamp and the system resets or power fails, the lamp con-

tinues to

ash after the system restarts.

• When using SLIU PCBs, the number of external voice mail ports you can install is limited by avail-

able system DTMF receivers.

• When the system rings an idle voice mail port, it will continue to ring the port until answered. The call

will not cycle to a another member of the UCD Group (as it will for voice calls).

• The system will never send a loop supervision disconnect signal (i.e., drop pulse) to voice mail ports.

Default Setting

• Voice mail is not installed.

1603-01: Transfer Recall Timer

(page 675)

1601-03: Call Forward No Answer

Timer

(page 670)

The line rings extension B for the Transfer Recall
time. See

Transfer

(page 358) for more.

Extension A transfers line to extension B, which
is forwarded Busy/No Answer (type 2) to exten-
sion C.

If unanswered, the call then rings extension C
(the forward destination) for the Call Forward
Ring No Answer time.

If still unanswered, call diverts to Key Ring.

1601-03: Call Forward No Answer

Timer

(page 670)

If still unanswered, the call rings the extension
that initially transferred the call (A) for the Call
Forward Ring No Answer time.

Summary of Contents for DSX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands

NEC DSX, Software Manual

Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands