NEC DSX Software Manual Download

Page: 226 / 984

Handsfree and Handsfree Answerback

196

◆

Features

DSX Software Manual

Other Related Features

Features

Automatic Handsfree

(page 30)

Automatic Handsfree allows a keyset user to place or answer a call Handsfree by just pressing a key
— without pressing

SPEAKER

rst.

Headset Compatibility

(page 198)

Handsfree is not available to extensions in the headset mode. Handsfree Answerback is still available
— depending on system programming.

Intercom

(page 211)

Handsfree Answerback allows a user to answer an Intercom call by just speaking toward the phone.

Microphone Mute

(page 241)

Use Microphone Mute to temporarily turn off the Handsfree microphone.

Single Line Telephones

(page 305)

On- and Off-Premise Extensions do not have Handsfree and Handsfree Answerback capability.

IntraMail Features

None

Operation

Using Handsfree

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To use Handsfree instead of lifting the handset:

Press

SPEAKER

To talk on a Handsfree call:

Speak toward your telephone.

• To temporarily turn off the Handsfree microphone, see

Microphone Mute

(page 241).

To change a handset call into a Handsfree call:

Press

SPEAKER

Hang up the handset.

To change a Handsfree call into a handset call:

Lift the handset.

Setting Up Incoming Voice Announcements

In these instructions:
[Super Display Soft Key]
[Keyset Soft Key]

To turn voice-announcements for your incoming Intercom calls on and off:

Select the voice announce option.

[Menu + Voice Announce]
[Menu + Vann]

Do one of the following.

Summary of Contents for DSX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands

NEC DSX, Software Manual

Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands