manualshive.com logo in svg

NEC DSX, Software Manual, Page: 139 / 984

Share
Download
NEC DSX Software Manual Download Page 139

Direct Inward Line

DSX Software Manual

Features

◆

109

Features

Direct Inward Line

Description

A Direct Inward Line (DIL) is a line that rings an extension directly. Since DILs only ring one extension, 
employees always know which calls are for them. For example, a company operator can have a Direct 
Inward Line for International Sales Information. When outside callers dial the DIL’s phone number, the call 
rings the operator on the International Sales line key. The DIL does not ring other extensions.

Assigning a DIL to an extension automatically provides immediate ringing and incoming access for the line, 
with no additional programming required.

A DIL can ring:

❥

Extension numbers (including the attendant’s extension)

❥

Ring Group master numbers

❥

UCD Group master numbers (including the voice mail master number)

Night Mode Control

The extension to which the line is terminated controls the night mode of the line. For example, if extension 
301 has line 1 assigned as a DIL, the user can press 

DND

 to switch line 1 to its night routing destination. 

Switching line 1 to night mode at extension 301 has no affect on the night mode of the system. This 

fl

exibil-

ity could allow a service dispatcher with several DILs to independently send lines to their night destinations 
without affecting the night mode of the entire system.

Over

fl

ow for Direct Inward Lines

If unanswered, DIL calls can route to a programmed over

fl

ow destination. The over

fl

ow destination can be 

an extension, Ring Group, UCD Group or voice mail (i.e., DIL destination’s mailbox). You can set up sepa-
rate DIL over

fl

ow destinations for the day mode and at night. If unanswered at the over

fl

ow destination, the 

call diverts to Key Ring.

Conditions

• None

Default Setting

• No DILs assigned.

A DIL lets an employee know which calls are just for them.

Summary of Contents for DSX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments