NEC DSX Software Manual Download

Page: 526 / 984

Greeting

496

◆

IntraMail Features

DSX Software Manual

Operation

Recording a Multiple Greeting and Setting Up Auto Attendant Do Not Disturb

[Super Display Soft Key] - [Keyset Soft Key]

Log onto Subscriber Mailbox.

(4)

Access the Mailbox Greeting options.

[Greeting] - [Greet]

IntraMail does the following:
•

Plays a summary of your current settings.

•

Displays the status of your active Greeting (1-3).

[GREETING n: RECORDED] - [GREETING n: RECORDED], or
[GREETING n: NOT REC] - [GREETING n: NOT REC]

•

Shows the Auto Attendant Do Not Disturb status.

[Auto-Attendant DND:OFF] - [Auto-Attendant DND:OFF], or
[Auto-Attendant DND:ON] - [Auto-Attendant DND:ON]

•

Provides soft keys for each of the 3 greetings.

[Greeting 1] - [Gr1]
[Greeting 2] - [Gr2]
[Greeting 3] - [Gr3]

Select a Greeting (which also makes it active).

(1)

[Greeting 1] - [Gr1]

(2)

[Greeting 2] - [Gr2]

(3)

[Greeting 3] - [Gr3]

(5)

Listen to the active greeting (if recorded).

[Listen] - [Lstn]

(7)

Record a new greeting (if not recorded), or rerecord the
current greeting.

[Record] - [Rec]

Record at the tone, then press # when done.

Pause or restart recording.

[Resume] - [Resume]
[Pause] - [Pause]

(3)

Erase the greeting.

[Cancel] - [Cncl]

End the recording.

[Done] - [Done]

Erase the currently recorded greeting (if any).

[Erase] - [Erase]

Go back to the Mailbox Greeting options.

[Exit] - [Exit]

Change Auto Attendant Do Not Disturb.

(6)

Turn Auto Attendant Do Not Disturb off or on.

[Auto-Attendant DND ON] - [Auto-Attendant DND ON]
[Auto-Attendant DND OFF] - [Auto-Attendant DND OFF]

Go back to mailbox Main Menu.

[Exit] - [Exit]

Plays Help message.

Summary of Contents for DSX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands

NEC DSX, Software Manual

Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands