NEC DSX Software Manual Download

Page: 566 / 984

Message Notification

536

◆

IntraMail Features

DSX Software Manual

- If the pager service doesn’t answer, IntraMail will retry the callout number. Message Noti

cation

may eventually cancel if the callout remains unacknowledged.

Conditions

• None

Default Setting

• Disabled

Programming

Programming that Applies to All Types of Message Noti

cation

4112-01: Outgoing Dial 9 Group

(page 868), select the Line Group (

) Message Noti

cation will

use for callouts.

You must make this assignment and have lines in the designated group for Message Noti

cation

callouts to work.

4111-02: Voice Mail Port Class of Service

(page 865)

4111-03: Voice Mail Port Toll Restriction Level (Day)

(page 866).

4111-04: Voice Mail Port Toll Restriction Level (Night)

(page 866).

4113-Line Access (Voice Mail Port Outgoing Line Access)

(page 869).

4114-Group Access (Outgoing Line Group Access)

(page 870).

4202-06: Number of Callout Attempts

(page 876), set how many times (

attempts) IntraMail will

retry an incomplete Message Noti

cation callout.

- This total includes unacknowledged callouts, callouts to a busy destination, and callouts to an unan-

swered destination.

- This option applies to pager and non-pager callouts.

2143-04: Message Waiting Lamp

(page 771), enter

Yes

If Message Waiting lamping is disabled (No), Message Noti

cation will not function.

Assign the Line Group the system uses for Message Noti

cation callouts.

Be sure the following Voice Mail port options do not restrict Message Noti

cation callouts.

Set the maximum number on incomplete callout attempts.

Be sure Message Waiting lamping for Subscriber Mailboxes is on.

Summary of Contents for DSX

























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands

NEC DSX, Software Manual

Search results

Summary of Contents for DSX

Reviews:

Related manuals for DSX

Brands by name

Popular brands