![background image](http://html.mh-extra.com/html/nec/direction-t/direction-t_manual_248510119.webp)
Installing Options 5-33
3.
Replace the access cover (see “Replacing the Access
Cover”).
4.
After securing your system, reboot it and run the Setup
program to set the new configuration.
ADDING EXTERNAL OPTIONS
This section includes installation procedures for the
following external options:
parallel printer
serial devices.
Connecting a Parallel Printer
NOTE
Before connecting a printer to the system, be
sure the printer is set up correctly. Follow the setup
instructions that came with the printer.
Connect a parallel printer to the system as follows.
1.
Turn off power to the system and printer.
2.
Connect the printer cable to the parallel port on the rear
of the system unit (see the following figure).