manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 67

    

 System BIOS and Utilities   4-9

 Maximum Capacity — This field displays the maximum
capacity of your hard disk drive, a value based on the
number of cylinders, heads and sectors.

„

Multi-Sector Transfers

 This option sets the IDE programmed I/O cycles so that
multiple sectors are transferred with a single interrupt.
Like the Cylinders/Heads/Sectors options discussed
above, you cannot access this option if the configuration
type is set to “Auto.” If necessary, check the
specification for your hard drive to determine the best
setting for optimum drive performance.

 The options include:

 

2 Sectors

 

4 Sectors

 

8 Sectors

 

16 Sectors (default)

 

Disabled.

„

LBA Mode Control

 This option specifies the IDE translation mode. LBA
causes Logical Block Addressing to be used in place of
Cylinders/Heads/Sectors. You can “Enable” (default) or
“Disable” this option. This mode cannot be changed
when “Auto” is selected.

 

 

 

 

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands