manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 53

    

 3-2   Understanding System Features

 Software installed on the hard disk includes:

„

Microsoft

®

 Windows NT

®

 or Windows

®

 95

„

MS Office 97

®

 Small Business Edition

„

Appropriate drivers for your hardware

„

McAfee

®

 VirusScan™, McAfee WebScan™.

SYSTEM CHASSIS

 The chassis provides an enclosure for the system board,
power supply, three PCI, two ISA expansion slots, one set
of shared PCI/ISA slots, and seven storage device slots.

SYSTEM BOARD COMPONENTS

 Your computer’s system board has the following
components.

Processor

 Processing for your system is provided by the Intel
Pentium microprocessor at speeds of 200 MHz or
233 MHz.

Ports

 Your computer’s system board includes the following
connectors on the rear-panel:

„

PS/2-style keyboard and mouse ports

„

Two Universal Serial Bus (USB) ports

„

Two serial ports (9-pin “D” style)

„

One parallel port

„

Audio (on some systems) — microphone in, line in, line
out, MIDI/game port.

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands