manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 138

    

 24-Hour Information Services   7-7

„

NEC Promotions

„

Message Board

„

Software Library.

6. 

Exit anytime by double-clicking the rectangle in the
upper left corner of the screen.

COMPUSERVE ONLINE SERVICE

 If you subscribe to CompuServe, use it to obtain
information about NECCSD products. Use CompuServe to
E-mail technical questions to the NECCSD Technical
Support staff, post technical questions and messages on the
Bulletin Board, and access the NECCSD BBS.

 

NOTE

You cannot download information from the

NECCSD Bulletin Board from CompuServe. You
must call the NECCSD Bulletin Board directly using
the procedure described earlier in this chapter.

 Use the following steps to access CompuServe and
NECCSD online information services.

1. 

Log onto CompuServe.

2. 

At the opening screen, click Service, type in 

NEC TECH

at the prompt, and click “OK.”

3. 

At the NEC menu, double-click one of the following
topics, then follow the prompts:

„

NEC Bulletin Board

„

Information About This Service

„

Access NEC BBS

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands