manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 127

    

 6-6   Setting System Board Jumpers

3. 

Locate the BIOS Recovery jumper (J8A1) on the system
board (see “Locating Jumpers” in this chapter).

 You may have to remove any installed expansion boards
to access the jumpers (see “Removing an Expansion
Board” in Chapter 5).

4. 

Remove the jumper block from pins 1-2 and set it on
pins 2-3. We recommend that you use needle-nose pliers
to move a jumper.

 BIOS Recovery Jumper

5. 

Replace the access cover (see “Replacing the Access
Cover” in Chapter 5).

6. 

Connect system power cables and monitor.

7. 

Power on the system. The system displays a system
configuration error message.

8. 

Power off, unplug the system and monitor, and remove
the cover.

9. 

Remove the jumper block from pins 2-3 and replace it
on pins 1-2.

10. 

If you removed any expansion boards, replace them
(see “Installing an Expansion Board” in Chapter 5).

 

BIOS Recovery (J8A1)

Normal Operation
(default) 

Recovery Mode

1

2

3

Jumpers

1

2

3

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands