manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 73

    

 System BIOS and Utilities   4-15

 

!

WARNING

 An asterisk symbol appearing next to an option
indicates that the selected IRQ is set to conflict with
another device.

 To return to the Resource Configuration submenu, press
the 

Esc

 key on your keyboard. Then press 

Esc

 a second

time to return to the Advanced Menu.

„

Floppy Disk Controller

 This option configures the system’s floppy disk
controller. Select “Enabled” (default) or “Disabled.”

„

IDE Controller

 This option configures the system’s integrated IDE
controller. Select from “Primary,” “Secondary,” “Both”
(default) or “Disabled.”

 To return to the Advanced Menu, press the 

Esc

 key.

Keyboard Configuration Submenu

 This submenu can be used to configure specific keyboard
features. To enter the submenu, highlight this field, then
press the 

Enter

 key. The following options appear:  

„

NumLock

 This option controls whether the NumLock key on the
keyboard is on or off at boot-up. The choices are “Auto”
(default), “On” or “Off.”

 

 

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands