manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 68

    

 4-10   System BIOS and Utilities

 

!

WARNING

 Don’t change the translation mode setting from the
option selected when the hard drive was formatted.
Changing the option after formatting could result in
corrupted data!

„

Transfer Mode

 This option determines how fast transfers occur on the
IDE interface. This mode cannot be changed when
“Auto” is selected. The options include:

 

Standard

 

Fast PIO 1

 

Fast PIO 2

 

Fast PIO 3

 

Fast PIO 4 (default).

„

Ultra DMA

 This option sets the Ultra DMA Mode for the hard drive.
This mode cannot be changed when “Auto” is selected.
The options include:

 

Mode 0

 

Mode 1

 

Mode 2

 

Disabled (default).

 To return to the Main Menu, press the 

Esc

 key. To move to

the Advanced Menu, press the right arrow key.

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands