manualshive.com logo in svg

NEC DIRECTION T, Manual

Share
Download
NEC DIRECTION T Manual Download Page 139

    

 7-8   24-Hour Information Services

„

Access CompuServe Information Services

„

Exit.

4. 

Exit anytime by double-clicking the rectangle in the
upper left corner of the screen.

E-MAIL/FAX TECHNICAL SUPPORT SERVICE

 NECCSD Technical Support offers technical support by
E-mail over the Internet network if you have a modem. The
Internet address is:

 

[email protected]

 You can also fax technical questions to NECCSD Technical
Support if you have access to a fax machine or fax/modem.
The fax number is:

 

(508) 635-4100

 When using the E-mail or fax support service, you should
include the following words in the subject field for prompt
response from the appropriate technical person:

„

Desktop (desktop or minitower systems)

„

Monitor

„

CD-ROM

„

Printer

„

Notebook.

 You should provide as much specific information about
your questions as possible. Also, if you are sending a fax,
please include your voice telephone number and your fax
number with the question. You will receive a response to
your questions within one business day.

Summary of Contents for DIRECTION T










































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands