Setting System Board Jumpers 6-5
BIOS Setup Access Jumper
5.
Replace the access cover (see “Replacing the Access
Cover” in Chapter 5).
6.
Connect system power cables and monitor.
7.
Power on the system. The system boots.
BIOS Recovery
If an interruption occurs during the BIOS upgrade that
prevents continuation of the process, it is possible that the
BIOS may be left in an unstable state. Use the following
procedure to recover your BIOS.
1.
Turn off the power and unplug the system and any
peripherals.
!
WARNING
Turn off the system before you change any jumper
settings.
2.
Remove the access cover (see “Removing the Access
Cover” in Chapter 5).
Jumpers
BIOS Setup Access
(J9C1)
Access Allowed
B
(default)
Access Denied
B
6
5
4
3
2
1
6
5
4
3
2
1