Network Configuration
NVR User Manual
48
Click “Edit Recipient” to go to the following interface.
Click “Add” and then input the recipient’s e-mail address in the popup window. Click “Add” in
the window to add the recipient. Click
to delete the recipient in the list. Click “Apply” to
save the settings. You can click “Edit Sender” to go to the e-mail configuration interface of the
sender.
10.5 UPnP Configuration
By UPnP you can access the NVR through IE client which is in WAN via router without port
mapping.
①
Click Start
Settings
Network
UPnP to go to the following interface.
②
Make sure the router supports UPnP function and the UPnP is enabled in the router.
③
Set the NVR’s IP address, subnet mask and gateway and so on corresponding to the router.
④
Check “Enable” in the above interface and then click “Apply” button.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...