Network Configuration
NVR User Manual
44
10
Network Configuration
10.1 TCP/IPv4 Configuration
IP Address Settings
Click Start
Settings
Network
TCP/IPv4 to go to the following interface. Check “Obtain IP
address automatically” and “Obtain DNS server address automatically” to get the IP address
and DNS server address automatically, or manually input IP address, subnet mask, gateway,
preferred DNS and alternate DNS. Click “Apply” to save the settings.
PPPoE Settings
In the above interface, check “Enable” in “PPPoE Settings” and then input the username and
password obtained from the dealer. Click “Apply” to save the settings.
10.2 Port Configuration
Click Start
Settings
Network
Port to go to the following interface. Input the HTTP port,
server port and RTSP port of the NVR and then click “Apply” to save the ports.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...
