Wizard Setup
NVR User Manual
14
④
Add Camera
. Click “Refresh” to refresh the list of online IP cameras which are in the
same local network with NVR and then click
to add the searched camera. Click “Add
All” to add all the cameras in the list. Click
to delete the added camera. Click “Delete
All” to delete all the added cameras.
Click
to edit the searched IP camera as shown on the below left. Input the new IP address,
subnet mask, gateway, username and the password of the camera. Click “OK” to save the
settings.
Click
to edit the added camera as shown on the above right. Input the new camera name,
IP address, port, username and the password of the camera. You can click “Test” to test the
effectiveness of the input information. Click “OK” to save the settings. You can change the IP
camera name only when the added camera is online. Click “Next” to continue.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...
