Preview
NVR User Manual
24
5.2 Sequence View
5.2.1 Quick Sequence View
You can start quick sequence view if the scheme has not been created. Go to the live preview
interface and then click
to pop up a little window. Set the dwell time in the window and
then click
to view the live group by group according to the camera number of the current
screen mode. Double click the sequence view interface to pause the view; double click again to
restore the view. Click
to stop the view.
5.2.2 Camera Group View In Sequence
You can start camera group view in sequence if camera group has been created (see 4.2.1 Add
Camera Group for details). Go to the live preview interface and then select a camera window.
Double click the camera group on the right side. The cameras in the group will start camera
group view one by one in the selected camera window.
5.2.3 Scheme View In Sequence
Click Start
Settings
System
Basic
Output Configuration to go to the following interface.
Area
①
displays all the dwell schemes; area
②
shows the detailed information of the scheme;
area
③
displays all the cameras and groups; area
④
is the menu bar (
: clear button; other
buttons are screen mode buttons).
Add / Delete Scheme
Click
in area
①
to create a new scheme. Click
on the top right corner of the
scheme to delete it.
Configure Scheme
a)
Select a scheme in area
①
.
b)
Click the screen mode button on the menu bar to set the screen mode of the scheme.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...
