Camera Management
NVR User Manual
17
Manually Add
: Add the IP camera manually. If the camera you need to add is in WAN, you
should input the WAN IP address of the camera.
Input the IP address, port and the correct username and password of the IP camera, select the
protocol. Click “Test” to test the effectiveness of the input information and then click “Add”
button. You can click
to delete the camera.
4.1.2 Edit Camera
Click
in the “Edit Camera” interface to edit the camera (See
Add Camera
in Chapter 3
Wizard Setup for details). Click
to delete the camera.
4.2 Add/Edit Camera Group
Click “Edit Camera Group” to go to the following interface. Click
to delete the group.
4.2.1 Add Camera Group
Click
to pop up the “Add Group” window as shown below.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...
