Network Configuration
NVR User Manual
47
③
Create domain name and then click
Request Domain
.
④
After you successfully request your domain name, you will see your domain name
information in the list.
⑤
Click Start
Settings
Network
DDNS to go to DDNS setting interface. Enable DDNS
and then select the
www.dvrdydns.com
DDNS type. Input the registered username, password
and domain name and then click “Apply”.
⑥
Map the IP address and HTTP port in the router (you can skip this step if UPnP function is
enabled).
⑦
Input the registered domain name plus HTTP port like
http://www.xxx.dvrdydns.com:81
in the IE address bar and then press Enter key to go to the IE client.
10.4 E-mail Configuration
Click Start
Settings
Network
E-mail to go to the following interface. Input the sender’s
e-mail address, username, password, SMTP server and SMTP port (you can click “Default” to
reset the SMTP port to the default value) and then enable or disable the SSL. Click “Test” to
pop up a window. Input the e-mail address of the receiver in the window and then click “OK”
button. The e-mail address of the sender will send an e-mail to the receiver. If the e-mail is sent
successfully, it indicates that the e-mail address of the sender is configured correctly. Click
“Apply” to save the settings.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...
