Playback
NVR User Manual
36
Button
Meaning
Previous frame button. It works only when the forward playing is
paused in single screen mode.
Next frame button. It works only when the forward playing is paused in
single screen mode.
Click
to step backward 30s and click
to step forward 30s.
Event list button. Click it to view the event record of
manual/schedule/sensor/ motion.
Tag management button. Click it to view the tag information.
Backup status button. Click it to view the backup status.
Back button. Click it to return to the live preview interface.
Introduction of time scale
A menu bar will appear after moving the mouse to the time scale on the right side. Click
to zoom in the timeline; click
to zoom out the timeline; click
to recover the
timeline to 24 hours’ ratio. Drag the timeline to show the hidden time on the top or bottom of
the timeline. You can also click
to show the hidden time on the top of the timeline or
click
to show the hidden time on the bottom of the timeline. Drag the slider at the bottom
of the time scale to show the hidden playback cameras.
After adding camera, the record files of the added camera will be shown on the time scale using
different color blocks. Green block stands for manual recording, yellow block stands for
motion based recording, blue block stands for schedule recording and red block stands for
sensor based recording.
Click on the color block of time scale to set the time and then the playback camera will play the
record from the time you set. You can also set the date and time on the top right corner of the
interface and then the camera will play the record according to the time you set.
Backup record by time scale
Drag the color blocks on the time scale to select the backup area and then right click the area to
pop up a backup information window. Click “Backup” button in the window to pop up the
backup window. Select the device name, backup format and then click “Backup” button to start
the backup.
7.3 Playback by Search
7.3.1 Playback by Time Slice Search
①
Click Start
Search
By Time Slice to go to “By Time Slice” tab. There are two view
modes: by time and by camera. In the time view mode, a maximum of 64 camera thumbnails
can be showed. If the camera thumbnail number is more than 64, the cameras will be listed
directly by their camera name, not the thumbnail. A maximum of 196 camera names can be
listed. If the camera name number is more than 196, the time view mode will be disabled and
the camera view mode will be available only.
②
Select one camera in the interface and then click “Open” button.
Summary of Contents for NGD-8116
Page 74: ...450011000711 A0 ...