Service Manual Chapter8. CDU
© 2016
Nautilus Hyosung Inc.
All Rights Reserved.
8-27
►The Side Guide Setting Specification.
1. Set the Reference Position referring to bill width and other information at the following
Table of The Side Guide Setting Position below.
No.
Bill Width
Reference
Position
Note
1
Less than 122mm
122
2
Greater than 122mm ~ Less than 127mm
127
3
Greater than 127mm~Less than 132mm
132
4
Greater than 132mm~Less than 137mm
137
5
Greater than 137mm~Less than 142mm
142
6
Greater than 142mm~Less than 147mm
147
7
Greater than 147mm~Less than 152mm
152
8
Greater than 152mm~Less than 157mm
157
US Dollar
9
Greater than 157mm~Less than 162mm
162
10
Greater than 162mm~Less than 167mm
167
2. Put the hook parts of Side Guide into the holes of Guide Assembly Position, and
then push it toward the pick-up assembly direction until you can see the screw hole.
(see figure below)