Opzoon Technology Co.,Ltd.All rights reserved.400-706-8366
www.opzoon.com
Manual
Outlook
Product Specification
Installation Guide
Front cover
Microphone
Power switch
Front cover fixing screws
Install the fixing hole
DC12V
socket
DC12V socket
Rear
cover
IO
interface
IO interface
Decorative
articles
Decorative articles
doors backplane
1.
According to the rear cover size and fixed hole position, the
rectangular groove and 4 fixed holes (diameter 8mm depth 45mm) are
opened in the installation position in connection with the actual
situation
.
2. Remove the front cover fixing screws and slide the front cover
upward. Secure the device to the backplane with 4 sets of screws (M4
* 14) and nuts (M4 * 7 * 3.2), then replace the front cover and secure
the screws.
3. Connect the cable to the device.
4. Secure the device to the wall with four sets of expansion bolts (M4
* 40) through the back panel, then affix the trim.
Product model
OFR-T1-M
Facial anti-counterfeit
Recognition distance
Recognition mode
Ambient light range
Support
60 ~ 90 cm
1 : N , 1 : 1 , 1:1 / 1:N
0 ~ 800LUX(Camera lens should be avoided from the
direct sunlight)
Processor
Memory
Flash
Camera
Display
Ambient temperature
Power
Dimenstion
2.1GHz quad-cord CPU plus 192-cord GPU
2GB DDR3 RAM
16GB（scalable）
Dedicated binocular camera (visiable light and near-infarad lens)
8.0" IPS LCD touch screen
0℃ ~ 45℃
12V 4.16A Max
123 x 165.71 x 320.61 mm (L x W x H)
WI
FI
Bluetooth
Wiegand input
Wiegand output
Relay
Netword port
UART
USB
OTG
Debug
DC
Support
Support
1，W_ID0/W_ID1/GND
1，W_OD0/W_OD1/GND
1，R_ON/R_COM/R_OFF
1
1
2
1
1
1
RJ45
R_OFF
R_COM
R_ON
GND
W_OD1
W_OD0
GND
W_ID1
W_ID0
Negative power
Positive power
UART
