Service Manual Chapter7. SPR (Receipt Printer)
© 2016
Nautilus Hyosung Inc.
All Rights Reserved.
7-9
► Disassembling Main PCBA
1. Remove the hex bolt (M3, 1 place) of the base bracket assembly and lift up the
upper bracket.
2. Pull out the TPH cable and the sensor cable from the main PCBA.
3. Remove the screws connected to the frame left/right (M3, 4 places) to remove the
TPH support assembly.
4. Remove the special screws (M3, 2 places) that are the upper/lower pivot of the base
assembly to remove the upper base bracket. Then, remove the BH screws (M3, 4
places) to remove the main PCBA.