Service Manual Chapter6. Safe Unit
© 2016
Nautilus Hyosung Inc.
All Rights Reserved. 6-1
Dial Lock
How to open the dial lock
▶
Opening the Safe using the opening index
Always turn the dial slowly and carefully. If you turn past a number in the combination
while dialing, DO NOT turn the dial backwards. You must re-dial the entire
combination. If the safe comes with a factory-set combination on 50, turn the dial to the
LEFT (counterclockwise) four complete turns stopping with 50 lined-up on the
OPENING Index on the fourth turn. Turn RIGHT until the dial stops. The combination
lock bolt will retract and the safe may be opened.
<Note!> If you dial past the number where you were supposed to stop, you
cannot reverse the dial to correct. The opening procedure must be
repeated from the beginning.
To open a safe with a previously set three number combination, i.e., 11-36-22:
1 Turn the dial to the LEFT (Counterclockwise) at least four complete rotations to clear
the lock to accept the combination. Never spin the dial to clear.
2 Using the OPENING Index, turn the dial LEFT and pass the first number of the
combination, 11, three times and stop exactly on 11 the fourth time.
3 Turn the dial to the RIGHT (Clockwise) and pass 36 two times and stop exactly on 36
the third time.
4 Turn the dial LEFT and pass 22 once and stop exactly on 22 the second time.
5 Turn the dial to the RIGHT. When the lock is open, the dial will stop between
90 and 0.
To lock the combination lock, turn the dial four complete rotations to the LEFT.
